Whether through advances in parallel computing and greater simulation performance or enhanced history matching capabilities and a more integrated workflow from geosciences through to production, reservoir simulation and the technologies and tools around it have advanced dramatically over the last few years.
Reservoir simulation stands as a crucial element of the reservoir management workflow—mitigating risk, improving decisions and ensuring more productive and profitable fields. Yet for all its advances, one area that reservoir engineers have struggled to incorporate into their workflows is that of fractures.
Importance of fractures
Fractures have a direct influence over fluid flow behavior, greatly enhancing the permeability of rocks and changing the distribution of flow in the reservoir.
Decades before fracturing became prevalent in unconventional reservoirs, inducing fractures around wells to enhance fluid flow was a common technique. This was achieved by injecting a mixture of fracturing liquid and proppant into the well at high pressures to create a set of (usually) vertical fractures propagating from the wellbore into the surrounding rock.
Because of the proppant, these fractures remained open even after the injection ceased, effectively expanding the influence region of the well and enabling increased production without the need to drill new wells.
Yet, despite the importance, influence and popularity of fractures, existing reservoir simulation workflows have struggled to incorporate well fractures either efficiently or accurately into the calculation of reservoir fluid flows.
Reservoir simulation advances
When trying to incorporate fractures into the workflow, reservoir simulation software has tended to be either overly simplistic—limiting the sureness of its predictions—or has tried to gain accuracy by using a fine-grained discretization of the reservoir around the fractures. However, fractures are regions of small volumes with high flows. This makes the modeling of fractures through conventional numerical techniques a challenge, impacting reservoir simulation performance.
It is with these issues in mind that Emerson has developed a new method to quickly and accurately model well fractures within its Roxar Tempest MORE reservoir engineering software.
The method forms part of a workflow, from well fracture planning to results visualization, and is designed to let reservoir engineers gain deeper insights into the effect of well fractures on their reservoirs.
How it works
The new fracture modeling feature handles the physics of the fracture-to-well connection and the multiphase flow within the fracture. It enhances previous tools that model fractures as a set of two-point flows as depicted in the left-hand sketch in Figure 1.
Although simple and fast, the approach ignores cell pressure variations along fractures, tends to overestimate inflow and does not allow direct crossflow between cells through the fracture. To address these issues, an enhanced approach has been developed with fractures modeled separately as 2-D grids intersecting the 3-D reservoir grid (Figure 2).
The simulator solves the pressure field inside each fracture and subsequently calculates the component flows from the reservoir into and along the fracture to the wellbore. This requires the solving of only a small linear system of equations, thereby avoiding separate fracture solver iterations inside the well solver and thus adding to the overall robustness and performance of the model.
How it looks
Setting up the fractures is straightforward using simple data entry forms that allow the user to define the fracture properties, including height, length, conductivity and geologically consistent direction.
High-quality visualization and plotting capabilities then offer a quick and clear understanding of the fracturing effect as shown in Figure 2. The figure shows a 3-D visualization of a reservoir with two types of well fractures: along vertical trajectories and across horizontal trajectories. The fracture grid coloring illustrates the pressure inside the fractures.
Fluid flows also are reported for each fracture rather than for the individual fractured grid cells (Figure 3). This makes it simple to see the effect of individual fractures and keeps data volumes manageable.
In summary
Hydraulically fracturing wells is a common engineering technique to enhance well productivity but has been awkward to simulate in the past and has led to slow or inaccurate predictions. This new technique scales to large reservoir simulations with hundreds of wells and provides easy setup and intuitive analysis tools. In turn, this allows more effective risk mitigation and decision support, especially when embedded in Big Loop uncertainty analysis workflows.
Following the recent Emerson acquisition of Paradigm, the combination of Emerson and Paradigm technologies will accelerate the launch of exciting geoscience and reservoir engineering solutions over the coming months.
Recommended Reading
Ithaca Deal ‘Ticks All the Boxes,’ Eni’s CFO Says
2024-04-26 - Eni’s deal to acquire Ithaca Energy marks a “strategic move to significantly strengthen its presence” on the U.K. Continental Shelf and “ticks all of the boxes” for the Italian energy company.
Apollo to Buy, Take Private U.S. Silica in $1.85B Deal
2024-04-26 - Apollo will purchase U.S. Silica Holdings at a time when service companies are responding to rampant E&P consolidation by conducting their own M&A.
Deep Well Services, CNX Launch JV AutoSep Technologies
2024-04-25 - AutoSep Technologies, a joint venture between Deep Well Services and CNX Resources, will provide automated conventional flowback operations to the oil and gas industry.
EQT Sees Clear Path to $5B in Potential Divestments
2024-04-24 - EQT Corp. executives said that an April deal with Equinor has been a catalyst for talks with potential buyers as the company looks to shed debt for its Equitrans Midstream acquisition.
Matador Hoards Dry Powder for Potential M&A, Adds Delaware Acreage
2024-04-24 - Delaware-focused E&P Matador Resources is growing oil production, expanding midstream capacity, keeping debt low and hunting for M&A opportunities.