At the 2017 IADC/SPE Drilling Conference and Exhibition in The Hague, Baker Hughes released the TerrAdapt drillbit, a new self-adjusting polycrystalline diamond compact bit design.
On conventional bits a fixed depth-of-cut (DOC) control setting is optimized for a single rock type. When the bit moves from one formation to another, stick/slip is likely to occur.
Of course, drillers and operators know what happens to the ROP when stick/slip happens. Drilling costs are increased when ROP decreases. The bit and other mechanical and electrical bottomhole assembly hardware can be damaged.
Baker Hughes explained at a press event held in March that DOC control for the TerraAdapt drillbit is achieved through a passive hydromechanical feedback mechanism encapsulated in self-contained cartridges installed inside the bit blades. The DOC control elements mounted on the cartridges respond to the external loads through rate-sensitive retraction and rapid extension strokes that were strategically designed.
Baker Hughes had an internal innovation contest called the Wildcat Challenge. The idea for the selfadjusting bit won. The team was given 12 months to move it from a concept to a proven solution. In 2015 formal development efforts began. As Scott Schmidt, vice president of drillbits for Baker Hughes, said, “It has been exciting to take such a novel idea from concept to commercial offering in less than three years.”
The TerrAdapt bit automatically changes its aggressiveness based on the formation through which it is drilling to mitigate vibration, stick/slip and impact loading. The initial release of the bit focuses on 8½-in. to 12¼-in. versions.
In a Delaware Basin well one operator’s ROP through interbedded formations was increased by 27% compared to the average ROP in offset wells. The bit reduced torque variations by 90%.
The industry continues to improve its effectiveness and efficiency through innovation. This is one example of efforts by service companies to provide operators with new solutions even in a downturn. Lowering costs through new ideas to maximize operations is what will keep oil fl owing even at $50/bbl.
The message is that the industry is not done innovating. Drillbits have been around for a long time, but there are still lots of opportunities for coloring outside the lines, as there are in every area of the oil industry.
Recommended Reading
U.S. Shale-catters to IPO Australian Shale Explorer on NYSE
2024-05-04 - Tamboran Resources Corp. is majority owned by Permian wildcatter Bryan Sheffield and chaired by Haynesville and Eagle Ford discovery co-leader Dick Stoneburner.
1Q24 Dividends Declared in the Week of April 29
2024-05-03 - With earnings season in full swing, upstream and midstream companies are declaring quarterly dividends. Here is a selection of dividends announced in the past week.
Analyst Questions Kimmeridge’s Character, Ben Dell Responds
2024-05-02 - The analyst said that “they don’t seem to be particularly good actors.” Ben Dell, Kimmeridge Energy Partners managing partner, told Hart Energy that “our reputation is unparalleled.”
Tellurian Reports Driftwood LNG Progress Amid Low NatGas Production
2024-05-02 - Tellurian’s Driftwood LNG received an extension through 2029 with authorization from the Federal Energy Regulatory Commission and the U.S. Army Corps of Engineers.
Zeta Energy Appoints Michael Everett as COO
2024-05-02 - Prior to joining Zeta Energy, a lithium-sulfur battery developer, Michael Everett previously served as president and COO at Advanced Battery Concepts.